Other structures such as a conditioning film covering the CL surface or a cover layer overlapping the biofilm matrix were also observed (Figures 8D and 8F). Figure 8 Observation of various

biofilm structures using SEM techniques selleck products after 72 h incubation. Biofilms in A-C were prepared using the SEM method with critical point drying. Biofilms in D-F were prepared using the SEM method with prolonged sodium hydroxide drying. Etafilcon A: A (500×), B (5000×), D (100×); Omafilcon A: C (2000×), E (500×), F (5000×). Different structural formations appear to cover the contact lens surface: extensive networks consisting of EPS and bacterial cells, mushroom-like structure, clumps and cover layers overlap compact, thick agglomerations of cells which are embedded in a network of EPS. Discussion Several biofilm JSH-23 research buy models have previously been used to investigate bacterial adhesion upon CLs, mainly in planktonic suspensions in microtiter plates [13, 19, 28–32] or by suspending CLs in culture vessels [8, 16, 17, 24, 26, 27, 39–41]. Another approach, which provides a continuous nutrient supply, involves the location of CL materials into flow cells [20–23, 42]. These biofilm models are predominantly two-phase systems, since they provide a solid:liquid

interface and furthermore, in the absence of a support system, the convex surface curvature of the CL is likely NCT-501 datasheet to vary significantly with loss of the normally convex surface tension, for example within flow cells and other model systems due to fluid dynamic forces. Although these in-vitro biofilm models are useful for obtaining information about the characteristics of bacterial adhesion on CL surfaces, it is suggested that the elaborations presented in the current study provide a greater degree of realism. These are i. the use of

a mucoid, environmental bacterial strain, ii. the use of a complex artificial tear fluid, iii. the incorporation of a convex contact surface to stabilise the convex shape of the CL, in a manner analogous to that of the human cornea, iv. exposure of the solid substratum (i.e. the CL) to both, liquid and air, phases and v. next the simulation of eyelid movements. Given that suboptimal use and care of CLs is known to be common [43–45] among CL wearers, the model described in the current study was designed to produce mature, recalcitrant biofilms which reproduce the morphology and importantly, the resistance properties of real-life ocular biofilms that can occur following incorrect wearing schedules, and ineffective CL care. P. aeruginosa SG81 is a stable, alginate-producing strain that forms strongly mucoid colonies on standard media agar [35, 46] and has been previously validated as model organism for investigation of in-vitro biofilm formations [35, 36, 47, 48]. With this strain, morphologically mature biofilms were generated on every test CL material.