0 min. Exposition to strong oxidative conditions yields a degradation product eluted around 8.4 min. Therefore, the chromatographic method is able to separate etoposide from its main degradation products. Fig. 3 Chromatograms of 600-mg/L etoposide solution submitted to various stress testing AZD5582 purchase of forced degradation study Evolution of etoposide content in supernatant in different

stress testing conditions is shown in Fig. 4. Those results show that etoposide content is greatly decreased in the supernatant in acidic and alkaline conditions while it remains stable in oxidative conditions. For alkaline conditions, decrease in etoposide concentration is probably caused by chemical degradation, as suggested by the chromatographic elution of by-products of etoposide and coloration of solution. For acidic conditions, it is unclear whether the decrease is due to the precipitation phenomenon or to a chemical degradation caused by stress factor, or a combination of ON-01910 ic50 both. Those results are consistent with previous observation

of pH-related degradation of etoposide in solution [3]. Fig. 4 Changing concentration as a function of time 100-, 400- and 600-mg/L etoposide solutions exposed to various stress factors 3.2 Changing Concentration of the Active Ingredient We decided to work with a confidence interval of ±5 % (i.e. [95, 105 %] of the nominal value) for concentrations in this study, although a confidence interval of ±10 % is stipulated for hospital preparations (i.e. [90, 110 %]) in the literature [9, 10]. For the sake of simplicity, by definition, the value Tolmetin of 100 % represented the concentration values see more observed at H0. For the 100-mg/L concentration (Table 3), we observed that the solution was stable for 24 h in the NaCl 0.9 % and 12 h in the D5W, both at room temperature and at 33 °C. Regarding the 400-mg/L solution, etoposide was stable for 24 h in both

diluents, both at room temperature and at 33 °C (Table 4), which is consistent with reported data [3, 5]. We retained a 24-h stability period for NaCl 0.9 % and D5W solutions at 400 mg/L. Table 3 Variation of the concentration values for the 100-mg/L etoposide solution h 0 2 4 6 8 12 24 NaCl 0.9 %  RT   Mean 100.0 % 102.8 % 99.9 % 104.1 % 98.6 % 99.5 % 99.4 %   RSD 0.000 0.072 0.042 0.023 0.038 0.038 0.026   δ (%) 0.0 2.8 −0.1 4.1 −1.4 −0.5 −0.6  33 °C   Mean 100.0 % 100.6 % 101.1 % 98.9 % 98.4 % 99.3 % 99.6 %   RSD 0.000 0.003 0.013 0.001 0.001 0.001 0.003   δ (%) 0.0 0.6 1.1 −1.1 −1.6 −0.7 −0.4 D5W  RT   Mean 100.0 % 99.9 % 98.5 % 99.1 % 99.5 % 101.1 % 93.7 %   RSD 0.000 0.013 0.012 0.019 0.001 0.011 0.012   δ (%) 0.0 −0.1 −1.5 −0.9 −0.5 1.1 −6.3  33 °C   Mean 100.0 % 100.2 % 100.9 % 99.7 % 100.7 % 98.3 % 93.8 %   RSD 0.000 0.007 0.016 0.003 0.009 0.012 0.019   δ (%) 0.0 0.2 0.9 −0.3 0.7 −1.7 −6.2 The mean and RSD values were calculated on six different measurements.